English
Get a free quote

Material calculator

How many meters or pieces can 1 kg make? Or, to make this many, how many kilograms do you need to order? It works for coated webbing, pure extruded strap, male-female strap, coated round cord, coated aluminum wire and TPU tubing.

How it is calculated

Grams per meter = cross-section area (mm²) × material density (g/cm³). A 1 mm² cross-section, 1 m long, is exactly 1 cm³, so multiplying the two numbers gives g/m. Meters per kg = 1000 ÷ grams per meter × (1 − waste).

ProductsHow the cross-section is calculated
Coated webbingWidth × thickness (rounded or wrapped edges counted as a half-circle on each side, straight edges as a rectangle) minus the webbing core; the coating is calculated by density, the webbing core by grams per meter
Pure extruded strapWidth × thickness, solid TPU
Hook-and-loop strapFlat strap edge (edge width × 0.8 mm) + round beads (solid or hollow tube)
Coated round cordThe outer circle minus the core cord is the coating; the core cord is calculated at the equivalent density of braided cord
Coated aluminum wireOuter circle minus the aluminum core is the coating layer; aluminum core at 2.70 g/cm³
TPU tubingOuter circle minus inner circle

Default densities are PVC 1.30 and TPU 1.20 g/cm³, and the webbing core is about 0.42 g/m per millimeter of width; all are reference values. The "about how many meters per kg" figure in the homepage webbing tool uses the same calculation.

FAQ

How accurate is the calculated length?

This is a theoretical value based on cross-section dimensions and material density. The error mainly comes from the weight of the webbing core and how much coating soaks into the webbing. The most accurate method is to cut a sample, weigh it, and enter its length and weight under "Calibrate with measurement"; the calculator then works from your measured values. Before ordering, the sample weight prevails.

Why is wastage 3% by default?

Machine start-up and adjustment, joins and cutting all cause waste, and 3% is typical. Small orders, many colors and short cuts waste more; you can change this value yourself.

How many meters of strap does one finished product use?

Finished product lengths come from the size chart in the size assistant (dog collars S/M/L, cat collars, leashes 1.2/1.5/1.8 m), plus a fold-back allowance: 12 cm for collars, 8 cm for cat collars, 36 cm for leashes (handle fold-back and hook fold-back). The allowances are reference values; adjust them to your patterns.

Are coated webbing and extruded products sold by the meter or by the kilogram?

Coated webbing is quoted per meter, 50 m per roll; extruded products are made to order by cross-section. However you buy, use this tool to convert between meters and kilograms to compare prices.